Latest peripheral wall Tenders | Government peripheral wall Tenders

CTN :45119356

27 May, 2026 NA

Parganas - West Bengal

Tender For bid to ras bid to ras supply of xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , supply, installing, testing and commissioning of pdb panel 800a, 415v. the panel shall be indoor wall mounted. it shall be completely made of crca sheet steel. , supply, installing, testing and commissioning of pf correction panel with rms 430kvar, 415v. panel indoor floor mounted, free standing with ip-31 degree of ip made of crca sheet steel. , material and labour for xlpe insulated, lt armoured electric sense cable with aluminiur star ded conductor 1100 volts grade, cross- sectional area 4 sqmm, 6 core , m and l for brick sub class b 250mm x 115mm x 0.75mm and laid in trenches as in protection of ug cabe complete all as specified and directed , supply and filling in and spreading unwashed river sand for cushioning and covering the uncer ground cables in trenches and punning to provide required cover , excavation in trenches not exceeding 1.5 mtr wide and not exc 1.5 mtr depth for laying cif cables, pipe lines, protection pipes , returning filling in soil including spreading leveling watering and well rammimg in layer n exc 25 cm complete all as specified and directed , remnoving excavated soil not exc 50 mtr ant depositing where directed at a level not exc 1.5 mtr above the starting point all as specified and directed , material and labour for earthing complete with copper plate electrode 600mmx 600mmx. 3.1.5 mm thick buriel directely in ground vertically , supply and fixing 25 sqmm interconnecting pvc pipe sets and pipe fittings along with suitable accessories complete all as specified and directed , civil work rcc panel base slab size - 2000mm l x 1300mm w x 150mm thickness , warranty service amc by cmc including breakdown service for 1 year to ensure the safe, reliable, and efficient operation of the electrical panel ) /bid number : gem/2026/b/7493216 * /dated: 08-05-2026 & & / bid document 1 / 19

corporations/Associations/Others

CTN :45262303

27 May, 2026 3.10 Lacs

Port Blair - Andaman And Nicobar Islands

Tender For construction of side drain wall and flooring covering slab parking place starting from gangadeen house to unni krishnan and dr prasad house at nayagaon ward no 10

corporations/Associations/Others

CTN :45276552

01 Jun, 2026 63.50 Lacs

Jaipur - Rajasthan

Tender For supply, installation, testing and commissioning of elv equipment in seminar hall and class room at government ayurved, yoga natural chikitsa integrated college, kekri district ajmer - based on electric bsr 2022, s&f following sizes (dia.) of isi marked virgin material mms ( is:9537 p - iii ) pvc conduit along with isi marked (is:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure a attached with this bsr, 25 mm, 32 mm, providing & fixing of iso certified company made virgin material pvc trunking system as per pwd specification for electrical works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . the trunking system shall have adaptable system for modular type rj 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. oem shall have submit nabl accrediated /cpet lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 32mm x 20mm, 100/105mm x 50mm, supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp (unshielded twisted pair), category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi/tia/eia-568 , the copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by pvc jacket. certified performance in a 4-connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms/pvc conduits/casing capping including making connections to information outlets and patch panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., supply and installation of unsheilded/360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6/6a application complying to latest ammendments, according. to cat. 6/6a channel, it should support channel as well as components requirements of cat.6/6a standards at frequencies of up to 250 to 500 mhz. cat 6/6a unshielded/shielded jack should be suitable to terminate 4 pair, 23/24 awg solid/stranded wire diameters, using 100 ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603-7-4 and complied with ansi/tia/eia 568 c.2 standard. jack should be rj11,rj12 & rj45 compatible. should support ethernet 1.2 gb/s atm,digital video and broadband/baseband analog video, voice over internet protocal (voip) specifications in existing modular/ms boxes along with necessory connections as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., cat 6, un-sheilded information outlet, supply & fixing of square faceplate for flush / surface mount information outlets single/dual or quad aperture , material should be pc+abs body, suitable for rj45 unshielded/shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., single aperture, providing & fixing of wiring accessories oem fabricated f

corporations/Associations/Others

CTN :45278994

01 Jun, 2026 63.50 Lacs

Jaipur - Rajasthan

Tender For sitc of elv equipment in seminar hall and class room at government ayurved, yoga natural chikitsa integrated college, kekri district ajmer -sitc of elv equipment - based on electric bsr 2022, s&f following sizes (dia.) of isi marked virgin material mms ( is:9537 p - iii ) pvc conduit along with isi marked (is:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr, 25 mm, 32 mm, providing & fixing of iso certified company made virgin material pvc trunking system as per pwd specification for electrical works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . the trunking system shall have adaptable system for modular type rj 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. oem shall have submit nabl accrediated /cpet lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 32mm x 20mm, 100/105mm x 50mm, supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp (unshielded twisted pair), category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi/tia/eia-568 , the copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by pvc jacket. certified performance in a 4-connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms/pvc conduits/casing capping including making connections to information outlets and patch panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , supply and installation of unsheilded/360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6/6a application complying to latest ammendments, according. to cat. 6/6a channel, it should support channel as well as components requirements of cat.6/6a standards at frequencies of up to 250 to 500 mhz. cat 6/6a unshielded/shielded jack should be suitable to terminate 4 pair, 23/24 awg solid/stranded wire diameters, using 100 ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603-7-4 and complied with ansi/tia/eia 568 c.2 standard. jack should be rj11,rj12 & rj45 compatible. should support ethernet 1.2 gb/s atm,digital video and broadband/baseband analog video, voice over internet protocal (voip) specifications in existing modular/ms boxes along with necessory connections as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , cat 6, un-sheilded information outlet, supply & fixing of square faceplate for flush / surface mount information outlets single/dual or quad aperture , material should be pc+abs body, suitable for rj45 unshielded/shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , single aperture, providing & fixing of wiring accessories oem fabricated following size g

CTN :45278401

02 Jun, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply of furniture and equipments - supply of furniture and equipments, wooden drawers/storage unit : - supply of high-quality wooden drawers/storage units, with precise dimensions, smooth finish, and hettich hardware, supplied and installed as per specifications.size- 7 3 length and width, and 1.5 depth. providing & supplying of dining table of size 4 2 , made up of original onyx marble top and teak wood base., pvc bubble sheet :- supply of durable pvc bubble sheet, 5mm thick, suitable for protection and insulation. size- 8 4 length and width 5mm thick., ss storage unit : supply of stainless steel storage units (grade 304) with brushed finish, corrosion-resistant, astm a240 standards. size- 7 3 length and width with 1.5 depth., vinyl woven wall covering sheet : supply of high-quality vinyl woven wall covering sheets, decorative, moisture-resistant, easy to clean. roll width: standard rolls are usually suitable for minimizing joints., cnc cut wall sheet : supply of cnc cut wall sheets made of teak wood with matte finish, supplied as per approved design. size- 15mm thick, fast flex chemical : supply of fast flex chemical (85 bsgs) suitable for bonding, made up of polymers.

State Government

CTN :45252374

05 Jun, 2026 1.44 Crore

Delhi - Delhi

Tender For supply of dismantling aluminium and gypsum partitions , disposal of building rubbish malba similar unserviceable, dismantled or waste materials , providing and fixing double scaffolding system , removing and refixing of slated wooden , providing and fixing woodworks slated perforated panels , providing and fixing of double leaf heavy curtains made by using high- density , providing and fixing stainless steel grade-304 curtain rod having wall thickness of 1.25 mm , free standing partition panel (q3) , textile floor covering - handmade wool carpet (v2) as per is 5641 (q3)

CTN :45252375

29 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of beautification of surrounding area , provision and fixing of high strength metal , installation of anti slip parking surfacing , provision and application of refined surface finish , dismantling and clearing of the old foundation , outside wall finishing treatment inclusive of required platforms , outside structural surface leveling , outside ground leveling , provision of external irrigation network , provision of external access formations for level transition , installation of electrical service sand bedding and brick , provision of approved ceramic planting units inclusive of suitable indoor foliage , luminaries positioned around the base perimeter of the bed , installation of curtain side wooden framing , execution of finished step covering

CTN :45210895

22 May, 2026 58.03 Lacs

Multi City - Multi State

Tender For construction of v.i building, drug de-addiction centre, therapuetic centre and hostel for pwd trainee including approach path, boundary wall, water supply, sanitary installation, drainage and electrical installation for iic complex at khurdha, odisha. sh:- covering of shafts, providing and laying d.i. 100 mm dia water supply line and miscellaneous works.

CTN :45239326

22 May, 2026 4.49 Lacs

Pune - Maharashtra

Tender For providing and fixing covering arragements for operings in the boundary wall, including m.s. gate at gpra colony, akurdi, pune maharashtra. (old tender id : 151878)

Central Government/Public Sector

CTN :45183310

25 May, 2026 NA

Narendra Nagarpin - Uttarakhand

Tender For repair to joinery, plumbing including sanitary fittings and fixtures, flooring, roof covering, wall panelling works and periodical services to certain bldgs at narendra nagar under ge 871 ews

Peripheral Wall Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others

State Government

Central Government/Public Sector